Water Play Equipment

The water falls from the center and diverts from the center into the four small holes around the Round dividing dish-B for sand and water playground equipment can be sand and water combination, using sand to control the speed and direction of water flow.

Children control the flow of water by pulling the Board gate for water play equipment's gate high or low.

Such an old-fashioned pump reminds one of a farm, a fairytale or an old market square.

As a stainless steel play equipment, water table for water playground equipment creates a multi-directional flow of water mainly through nylon parts, on which children can walk and train their balance.

A great way of moving water from a lower to a higher level is the Archimedes Screw, the old principle of water screws.

The water can flow from both sides into the dish so that a constantly changing flow configuration results.

Turn the bucket wheel for water play equipment to hold water.

When the big disc is turned, the conveyorsnail starts taking in water and let it run off through the central hub.

Utilizing water pressure to create a suction ring fountain scene.

Rectangular water basin-A for water play equipment focuses on the convergence of the water flow, and then through the lift switch at the outlet, you can control the water flow for storage or out of the only outlet.

Triangular water dish for water play equipment is mainly to converge the water flow, through the outlet of the lift switch, you can control the water flow for water storage or out of the two outlets.

Water basin is primarily used to converge the water flow and allow it to flow out of the only outlet.

Adopting pebbles and utilizing water pressure to splash water around to create a fountain scene.

Adopting the shape of warning column and utilizing water pressure to create a fountain scene.