water play

As the large disc rotates, it activates the conveyor, which draws in water and allows it to flow out through the central hub.

Rotate the bucket wheel on the water play equipment to retain water.

As stainless steel play equipment designed for water playgrounds, the water table facilitates a multi-directional flow of water primarily through nylon components, allowing children to walk on it and develop their balance skills.

Our primary water play equipment addresses the challenge of engaging children with water in an interactive way, allowing them to experience and ponder the dynamics of water flow.

Water can flow into the dish from either side, creating a dynamic and ever-changing pattern of water flow.

The Archimedes Screw, an ancient principle of water conveyance, is an effective method for elevating water from a lower to a higher level.

Water flows down from the middle of a round dish and splits into four smaller holes around the edge. This setup is part of a play area where kids can play with both sand and water. They can use sand to change how fast and where the water goes.

Rectangular water basin-A for water play equipment focuses on the convergence of the water flow, and then through the lift switch at the outlet, you can control the water flow for storage or out of the only outlet.

Children control the flow of water by pulling the Board gate for water play equipment's gate high or low.

Triangular water dish for water play equipment is mainly to converge the water flow, through the outlet of the lift switch, you can control the water flow for water storage or out of the two outlets.

Utilizing water pressure to create a suction ring fountain scene.

Water basin is primarily used to converge the water flow and allow it to flow out of the only outlet.

Adopting pebbles and utilizing water pressure to splash water around to create a fountain scene.

Adopting the shape of warning column and utilizing water pressure to create a fountain scene.