water play equipment

The water falls from the center and diverts from the center into the four small holes around the Round dividing dish-B for sand and water playground equipment can be sand and water combination, using sand to control the speed and direction of water flow.

Children control the flow of water by pulling the Board gate for water play equipment's gate high or low.

Such an old-fashioned pump reminds one of a farm, a fairytale or an old market square.

As a stainless steel play equipment, water table for water playground equipment creates a multi-directional flow of water mainly through nylon parts, on which children can walk and train their balance.

A greatway of moving water from a lower to ahigher level is the Archimedes Screw, theold principle of water screws.

The water can flow from both sides into the dish so that a constantly changing flow configuration results.

Turn the bucket wheel for water play equipment to hold water.

When the big disc is turned, the conveyorsnail starts taking in water and let it run off through the central hub.

Utilizing water pressure to create a suction ring fountain scene.

Rectangular water basin-A for water play equipment focuses on the convergence of the water flow, and then through the lift switch at the outlet, you can control the water flow for storage or out of the only outlet.

Triangular water dish for water play equipment is mainly to converge the water flow, through the outlet of the lift switch, you can control the water flow for water storage or out of the two outlets.

Mainly used for standing water

The water flow is diverted in the water play equipment after convergence.

Aggregate and control the flow of water.